+44(0)1709 599 222

Triple-C Savings

The revolutionary portable gas detector with a revolutionary price

All applicable vessels will need to maintain the system in line with the effluent standards or risk detention. Does your portable water testing solution comply with complex sewage discharge legislation?

Why bump testing your gas detection equipment onboard your vessel is important.

Combustible gas explosions can also be incredibly hazardous and, in addition to putting the lives of crew in danger, may destroy cargo and equipment as well as damaging the vessel itself.

Regular tests using gas detection equipment are intended to protect crew and vessels from unknown hazards onboard. Tests are typically used to check and maintain safe levels of oxygen in enclosed spaces, monitor levels of oxygen in inert gas and inside tanks, measure the flammability of hydrocarbon gas, measure levels of hydrocarbon gas prior to entering pump rooms and other enclosed spaces and to locate and measure other potentially toxic gases within a ship.

Health and Safety Executive: Safety alert!

This HSE Safety Alert highlights the risk of misleading gas detection readings associated with the use of sampling tubes with pumped gas detectors.  Sampling tubes are sometimes used to extend the reach of the detection device and/or to allow detection at an increased distance from the user.

In a recent incident a gas detector failed to detect the presence of a flammable vapour.  Hot work proceeded in the belief that there was no flammable vapour present.  The subsequent explosion resulted in a fatal injury.

This incident has highlighted the importance of selecting the correct systems for gas detection and verifying the effectiveness of the detection system.

The investigation found that a significant contributor to the failure to detect the flammable vapour was it being adsorbed on the inner surface of the sample tube. This meant that no flammable vapour reached the detector before the test was completed and a false conclusion that the work area was free of flammable vapour.

Ensure accuracy of your gas detection equipment

The only way to know whether an instrument is capable of proper performance is to expose it to test gas. Exposing the instrument to known concentration test gas verifies that gas is properly able to reach and be detected by the sensors. It verifies the proper performance of the instrument’s alarms, and (if the instrument is equipped with a real-time display), that the readings are accurate.

This bump test guide details what a bump test is and how it should be carried out prior to using gas detection equipment to ensure the accuracy of the equipment and therefore its ability to keep the user safe.

Download Bump Test Guide

Please enter your details now to download our guide.

By submitting your information into this form, you are confirming you have read and accepted the terms presented within the Martek Marine Privacy Policy. We will never pass your details to anyone else. We will use your information to provide a personalised and tailored service when we communicate with you. We will also ensure your data is securely transmitted to our secure data environment where it will be protected within the Microsoft Dynamics 365 infrastructure.

Triple-C Savings Save Over $300

Fantastic savings and free shipping on our Triple-C Gas Detector with our exclusive November Special Offer.

Offer valid until 30/11/2023

Find Out More